Now use the universal support place has a lot of, its application in various industries are widely, may be some friends not particularly understand the universal support, this article will from the aspects of construction degree of accuracy, construction, maintenance, drainage water, slope and so on each aspect to the difficulty of the to get to know some of its performance advantages:

• The first is to understand the universal support, general universal support is made of PP polypropylene, high material strength, and light weight ground load is small, and the traditional process used for cement block pier mass, the ground load is also large.

• From the construction accuracy. The height of the universal support is precisely controlled. According to the actual situation, the height can be adjusted freely by adjusting the thread. The stone surface is uneven and can be adjusted by gaskets, with little human influence. The height of ordinary process is not easy to control, and human influence is great. It needs to depend on the brick modulus and cement thickness to control the height, and the cement can be laid with a certain strength, so it may lead to a large height deviation, can not be modified in time, and low precision.
  

• From the degree of construction. Traditional technology, large dosage, high cost. Moreover, cement takes time to set and needs special maintenance. Such as rain, delay the construction period. Universal support low cost, adjust the height, can be installed. Affected by the weather is small, rainy days can also be installed.
  

• In terms of maintenance. Using the traditional process, pipeline maintenance is cumbersome, laborious, and costs time and building materials. If the universal support device is used, only the stone plate can be opened, which is quick, convenient and cost saving.

• From the construction period. The traditional process construction cycle is long and difficult to complete. Universal support cycle is short, saving a lot of labor time.

• In terms of the ease of drainage and storage. The universal support device will be the stone overhead, there is a lot of space below the water storage, and the separator leaves a seam, the stone surface drainage is superior, no obvious water.
  

• In terms of bleaching. The support device avoids direct contact between the stone and the cement floor, thus effectively avoiding the pan-alkali phenomenon.
  

• In terms of finding the slope. Support device to find slope accurate, simple operation, and ensure the flatness of the surface layer. However, it is difficult to find slope in the ordinary process, and it is necessary to control the thickness of cement to find slope, which is easy to cause uneven surface layer.